Notes For Cable Drum Powered Die Handling Cart - Products News - News - Xinxiang New Leader Machinery Manufacturing Co.,Ltd

Notes For Cable Drum Powered Die Handling Cart - Products News - News - Xinxiang New Leader Machinery Manufacturing Co.,Ltd

KPT series cable drum powered die handling cart running distance can not be too long, do not exceed 50m, otherwise it is easy to wrap the cable. What should you pay attention to when using the cable drum powered die handling cart in daily use?

1. The tow cable should have a solid fixed clip on the power supply end to fix the cable in the air or on the power cabinet, so as to prevent the cable from being broken after the die handling cart is started.

2. Check whether there are any foreign objects on the track before the operation of the electric die transfer cart. There are no people or other debris on the channel. All normal fire lines can run the electric transfer cart.

3. When using the flatbed die handling cart, first send the power of the ground power cabinet, and then close the power button of the cart's electric control cabinet on the flat cart. At this time, the power supply indicator lights up and the power supply malformation enters the die handling cart.

4. Check whether the power mechanism is incomparable before starting the electric die handling cart. Can you put the gear oil in the machine to be in place, and apply smooth grease on the chain. After confirming that the part is correct, the flat cart will be omitted.

5. After starting the flat cart operation, please do not perform the reverse reverse operation on the flat cart. The flat transfer cart should be reversible after a biased direction. Otherwise, the flat transfer cart's power machine layout will be slack or even damage the flat cart.

6. The flat die handling cart for a long time (more than a few days) when not in use, should be placed under the wheel triangle triangle to ensure that the flat cart does not slip.

7. When the electric flat cart is not in use, the total power supply in front of the cart control box should be disconnected, then the power of the ground power supply cabinet should be disconnected, and the control handle should be put back into the control box.

8. After using the flat cart for 2-3 months, check the grease on the gear oil and chain in the gearbox. If there is any increase, it should be filled in place.